2.5 Ton Telehandler | 5.9 m Telescopic Forklift
2.5 Ton Lifting Capacity
Lift loads up to 2,500 kg for construction materials, farm supplies, pallets, and outdoor handling tasks.
5.9 m Lift Height
Reach up to 5,900 mm for elevated stacking, loading, and material placement operations.
Four-Wheel-Drive Mobility
Four-wheel drive supports movement across suitable construction sites, farms, yards, and uneven outdoor work areas.
58 kW Diesel Power
The YUNNEI YN27GBZ engine provides listed 58 kW power for regular telescopic handling operations.
The ST625 is a 2.5 ton telehandler, also called a telescopic forklift, developed for outdoor material handling where conventional forklifts may not provide enough lift height or forward reach. Its maximum lift capacity is 2,500 kg, while the listed capacity at full height is 2,000 kg. This makes the ST625 suitable for planned handling tasks involving construction materials, palletized goods, agricultural supplies, equipment, and general yard loads, subject to the official load chart and operating conditions.
With a maximum lift height of 5,900 mm and a 450 mm reach at maximum lift height, the ST625 supports elevated material placement and truck-side loading applications. Its four-wheel-drive system, torque-converter transmission, and 58 kW YUNNEI YN27GBZ diesel engine are configured for suitable outdoor work areas such as construction sites, farms, building-material yards, and logistics yards.
The ST625 combines telescopic reach with practical equipment dimensions. The listed overall length to the front carriage is 3,900 mm, the overall height is 2,000 mm, and the unladen weight is 4,988 kg. These dimensions should be considered when planning transport, access routes, storage areas, turning space, ground conditions, and the final attachment configuration.
Why Choose the ST625 Telehandler?
2.5 Ton Maximum Lift Capacity
The ST625 lifts up to 2,500 kg and is listed with a 2,000 kg capacity at full height, helping buyers match the machine to common outdoor material-handling requirements.
5,900 mm Vertical Reach
The listed lift height supports elevated stacking, material placement, construction work, agricultural handling, and truck-loading tasks where additional reach is required.
Four-Wheel Drive for Outdoor Mobility
The four-wheel-drive configuration supports movement across suitable construction sites, agricultural areas, building-material yards, and logistics work zones.
Torque-Converter Transmission
The ST625 is specified with a torque-converter configuration for controlled power delivery during planned material-handling operations.
58 kW Diesel Engine
The YUNNEI YN27GBZ engine is listed with 58 kW rated power for regular telescopic forklift work.
Practical Site and Transport Dimensions
The 3,900 mm overall length to the front carriage, 2,000 mm overall height, and 4,988 kg unladen weight provide key information for access, transport, and site planning.
115 L Hydraulic Oil Tank
The listed 115 L hydraulic oil tank supports hydraulic-system planning; confirm the final hydraulic circuit, flow rate, attachment requirements, and service schedule for the selected configuration.
63 L Diesel Tank
The 63 L diesel tank provides a defined fuel-capacity reference for work-cycle planning. Actual fuel consumption varies with load, duty cycle, terrain, and operating conditions.
